How do I apply the Miracle Mold Stain Cleaner Gel?Updated 2 months ago

Product Usage Instructions:

Before You Begin:

Ensure the area is well-ventilated.

Make sure the surface is dry and clean.

Preparation:

Remove the foil covering the cap before attaching the nozzle.

Twist off the nozzle cap before use.

Application:

Squeeze the gel and spread it evenly across the affected area.

Allow the gel to sit for 3-5 hours.

Cleaning:

Wipe away the gel and mold with a damp cloth or rinse with water.

For stubborn mold, a second treatment and the use of an abrasive pad may be necessary.

Note:

Do not touch the gel directly with your hands.

Safety Warnings:

General Safety:

If medical advice is needed, keep the product container or label on hand.

Do not ingest.

Keep out of reach of children and pets.

Avoid direct contact with skin and eyes.

Avoid inhaling vapors for prolonged periods or repeatedly.

Keep away from heat, sparks, flames, and other ignition sources.

In Case of Contact:

Eyes: If contact occurs, rinse thoroughly with water. Seek medical attention if irritation persists.

Emergency Contacts:

Australia: Call 000 or the Poisons Helpline at 13 11 26.

USA: Call 1-800-222-1222.

Canada: Call 1-844-764-7669.

UK: Contact NHS24 on 111.

Additional Information:

For more detailed safety information, refer to the Material Safety Data Sheet (MSDS) available at glassguard.com/msds.

https://glassguard.com/products/mold-stain-cleaner